Maumee Auto Repair

Steering a vehicle these days doesn't take much effort, but if you got behind the wheel back before power steering was invented, you'd need to practically have the strength of Hercules to turn the wheel.    The first power steering systems widely available changed everything.  Chrysler introduced its Hydraguide power system in 1951. The "hydra" was for a hydraulic pump. It pressurized fluid that multiplied the force applied to the steering wheel so it was easier to turn the wheels on the ground. That pump got power from a belt attached to the engine, but unfortunately it wasted a lot of energy in the process. Plus, the system of hoses and pumps required a fair amount of maintenance and repair. Some say this system provides the most "natural" steering experience of power systems. Recently, automakers have turned to electric power steering.  It gets its power from the car's electrical battery and charging system and uses an electric motor to turn the wheels.  Sin ... read more

If your vehicle’s power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicle’s engine to deliver its power through a driveshaft to make the rear wheels rotate.  You need U-joints because the surfaces you drive on aren’t perfectly flat, and the driveshaft has to allow for some flexibility when you are traveling over uneven surfaces. As you can imagine, the U-joints have to move and flex a lot as your vehicle is going down the road.  They have bearings in them to allow that flexibility, and those bearings are lubricated when your vehicle is made.  Some U-joints have lifetime lubrication and are not designed to be serviced.  When they fail, they have to be replaced.  Others have grease fittings on them that need periodic lubricating by a technician at intervals recommended by your vehicle’s manufacturer.  There are signs you can look ... read more

It’s important for safe driving that two of the most important systems in your vehicle work right.  One is the brakes.  The other is the steering.  Nearly all vehicles on the road have some sort of power steering that allows you to direct a very heavy machine with little effort.  There are two types, hydraulic and electric.  Many newer vehicles have electric power steering that uses an electric motor to make your steering easier.  But there are many vehicles on the road that use a system that has been around for years.  It uses a power steering pump, a cylinder, several valves, and hydraulic fluid to make it easy for you to turn the wheel.  If you have hydraulic power steering in your vehicle, it’s important to change your power steering fluid every once in a while.  Over time, the fluid gets contaminated with dirt and other particles.  You might notice your steering is loose, maybe harder to turn and makes a low, strainin ... read more

Nearly every modern vehicle on the road today has power steering, a wonderful invention that makes steering take far less effort than it did in the "good old days."  Today, we take our steering for granted: until something goes wrong, that is. Most power steering these days is rack-and-pinion, the rack being a metal bar between the front wheels with notches in it and the pinion being a gear whose teeth fits into those notches.  Adding power assist makes it easy to turn. That assist comes in the form of hydraulic fluid that is pressurized by a pump powered by the engine, an electric motor that adds a power assist or a system that uses both an electric motor and hydraulic fluid. Your vehicle usually gives you a heads up that something is going wrong with its steering. Here are a few signs to look for: A humming, whirring, rubbing or grinding sound coming from you engine compartment when you turn. Signs of hydraulic fluid leaking, such as wet spots under your vehicle. The smell ... read more